Neo CV500 Grease

NEO Synthetics

$44.99 
SKU: CV500C

CV 500 Grease

Constant Velocity & Articulated Joint Lubricant

Anti-Seize Lubricating Paste to 1200�F


ADVANTAGES

  • High Efficiency
  • High Load Carrying Capacity
  • Low Friction and Wear

  • Wide Thermal operating range
  • Resists High Shock Load
  • Resists Water Washout
  • Prevents Rust and Corrosion
PRODUCT DESCRIPTION

NEO CV 500 Grease is a complex blend of mineral oils, synthetic esters and lubricating solids. NEO CV 500 should be used when temperature extremes are not a problem.(SEE NOTE BELOW)Their designed use is for severe sliding contact such as extremely heavily loaded ways and guides, very slow, large diameter ball and roller bearings, bushings, linear and oscillating mechanism and open gears, articulated, CV and universal Joints subject to the harshest shock loading, angularity and radial forces such as found on ALL-TERRAIN VEHICLES. Can be used on sensitive metallurgy including copper, silver, tin, and aluminum and their alloys. Exceptionally resistant to water wash conditions including emulsions. Special compounding and lubricating solids provide superior antiseize characteristics and exceptional acid resistance.

NOTE: HPCC#1 Should be used when extreme high and low temperatures are encountered or sustained. Elevated temperatures indicate extra protection is needed.

APPLICATIONS

Vehicular uses of NEO CV 500 Grease are typically constant velocity couplings (CV Joints) and industrial applications include linear reciprocating mechanisms, heavily loaded ways and guides, spline couplings subject to linear motion and heavy loads in either direction, press fit and assembly operations, jack screws, mechanical presses, and very slow, large diameter ball and roller bearings.

SPECIAL APPLICATIONS

Anti-Seize to 1200�F. Assembly and spline lubricant, racing cam lubricant, press fitting stainless steel, jack screws, high temperature open Gear Lubricant, Mechanical Presses, Dipper Sticks and Fasteners. Pump and valve lubrication in corrosive environments. MoS2 (Moly) is recommended for all constant velocity joints except for double articulated spider types.

SPECIFICATIONS

PDF SPECIFICATIONS
Specification Value
N.G.L.I. Grade 2�
Worked Penetration @ 60 Strokes 250
Dropping Point 315�C
Base Oil, ISO VG Grade 1000
Pour Point + 5�C, +41�F
Flash Point +270�C, +518�F
Shell 4 Ball EP, Weld Load, Kg >>>Does Not Weld @ 800Kg<<<
Load Wear Index 200